Looking for Wood Burning Stove Installers in Stevenage? D0A

Get up to 4 free quotes for Wood Burning Stoves in Stevenage

Top Wood Burning Stove Installers in the Stevenage area

CHIMTEC LTD

38 St. Clairs Road CO16 8QJ St. Osyth

FIRES AND HEATING

UNIT 7 MARLBOROUGH WORKS - ARCHWAY ROAD LU3 2QZ LUTON

STOVESHOP

21 HEREWARD ROAD - Eastbourne bn23 6tg SUSSEX

Requests and job leads for Stevenage Wood Burning Stoves

Mon 6 October 2014 at 08:23

Need a wood burner for a medium sized fireplace, about 3 feet in length. Have been using an open fire for the last few years. Room is large (not sure of dimensions)

Property type: House

Services required: Supply & Install

Job start date: Less than two months

Mon 5 May 2014 at 20:57

Currently having an extension at an old military 2 bed semi house. Previously had a baxi Bermuda back burner, now have a combi fitted in loft. We are looking to fit a multi fuel stove in the living room. My builder can increase the size of the fire place to suit. We have recieved 1 quote for a 7kw arrow eco burn plus to be supplied and fitted by a local company, including s/steel flue and fittings. We would like to compare other quotes.

Property type: House

Services required: Supply & Install

Job start date: Less than two months

Mon 4 August 2014 at 14:40

To supply and install a woodburning stove in existing fireplace. If quote can include installation of hearth that would be great.

Property type: House

Services required: Supply & Install

Job start date: ASAP

Thu 2 January 2014 at 18:16

To supply and fit small wood burner (5kw-ish) in pre-existing opened-up fireplace with hearth. Chimney will need a flue fitted.

Property type: House

Services required: Supply & Install

Job start date: Less than a month

Tue 10 June 2014 at 14:09

We have gas fire and want to take it off and install the Ekol crystal 5

Property type: House

Services required: Supply & Install

Job start date: Less than a month

Sun 1 January 2012 at 18:18

We have a coalbrookdale much wenlock multi fuel boiler stove that is in need of repair. It is over 10 years old, not sure exactly. It's output is between 6kw and 10kw.

Property type: House

Services required: Repair

Job start date: ASAP

The client is looking for: To get quotes and a contractor to do the work

Wed 1 December 2010 at 13:45

We ve recently moved to a house with a wood burner installed but we had to move the woodburner to do some painting and now I know it needs the flue reconecting and a general service.

Services required: Repair

Property type: House

Job start date: ASAP

The client is looking for: To get quotes and a contractor to do the work

Mon 13 October 2014 at 09:54

Service stove including renew seals / ropes Sweep chimney

Property type: House

Services required: Repair

Job start date: ASAP

Wed 1 October 2014 at 15:15

I have purchased a wood burner and all fittings but my builder has been taken ill and cannot fit it. It was all purchased from Stovesonline. I wish to know how much it would cost to fit please? The property is a bungalow so only one ceiling to get through. Thanks.

Property type: House

Services required: Install only

Job start date: Less than two months

Wed 21 July 2010 at 18:10

I have recently bought a house that had a wood burning stove unsafely installed. I would like to have it reinstalled in a second larger fire place in the same room, have the chimney swept and inspected by a registered tradesperson

Services required: Install only

Property type: House

Job start date: Less than a month

The client is looking for: To get quotes and a contractor to do the work

Sat 9 November 2013 at 13:16

small stove for dining room

Property type: House

Services required: Supply & Install

Job start date: ASAP

Tue 31 August 2010 at 14:27

Quote for supply and installation of a simple smallish wood burning stove sat onto a slate hearth. There is also a requirement for the opening to be opened-up and then re-rendered to be made good.

Services required: Supply & Install

Property type: House

Job start date: Less than two months

The client is looking for: To have just an idea of the price

Tue 13 October 2009 at 21:00

Following a burglary I need two wood burning/solid fuel stoves installed. (The burglars ripped out the fires) There are existing registry plates with approx 6 holes holes in them. The traditional brick flues are unlined but fit for purpose with plenty of draft Depending upon price and speed I may ask for a traditional basket fire to be installed in the living room chimney and forgo the 2nd wood burner (or I may ask to have wood burner as well). Part of the payment will be from insurance (limited funds) and part from personal funds (even more limited). Secondhand units acceptable. The kitchen used to have a Rayburn in it that aso supplied hot water - pipes still there so possible to have a back boiler if price basic. Need help at a reasonable price please. Thanks

Services required: Supply & Install

Property type: House

Job start date: ASAP

The client is looking for: To get quotes and a contractor to do the work

Tue 16 December 2008 at 13:45

Complete repair, new sealing!

Services required: Repair

Property type: House

Job start date: ASAP

The client is looking for: To find a contractor available to do the work

Wed 25 August 2010 at 20:33

We are looking to install a wood burner in our lounge. We have an open fireplace currently which is not currently in use

Services required: Supply & Install

Property type: House

Job start date: Less than two months

The client is looking for: To get quotes and a contractor to do the work

Thu 24 September 2009 at 21:39

Supply and install a log stove to lounge at back of house (small house) to wall which faces out to neighbours garden and adj to one side of their conservatory. Must be clean burning type stove.

Services required: Supply & Install

Property type: House

Job start date: Date not set

The client is looking for: To get quotes and a contractor to do the work

Tue 5 May 2009 at 11:18

Supply and Install Multi Fuel liner and chimney pot

Services required: Supply & Install

Property type: House

Job start date: ASAP

The client is looking for: To get quotes and a contractor to do the work

Wed 21 October 2009 at 10:12

Would like to install a Carnwood Island II into a fireplace (with chimney liner, insulation etc and birdguard on chimney etc). Fireplace is already there and the right size etc.

Services required: Install only

Property type: House

Job start date: ASAP

The client is looking for: To get quotes and a contractor to do the work

Wed 29 October 2008 at 11:22

supply and installation of wood burner

Services required: Supply & Install

Property type: House

Job start date: Less than two months

The client is looking for: To get quotes and a contractor to do the work

Mon 8 September 2008 at 17:38

Line existing std class A domestic chimney (currently in use as open fire) for wood / multifuel freestanding stove. Raise lintel in fire place from 56cm to ~80cm & make good plastering to chimney breast. Fit sutable rain pot to flue top. Fit stove to hearth & supply stove pipe. Provide small wod / multifuel stove suitable to fit opening (33cm deep by 56cm wide). Provide certification to buiilding regs or hetas approval.

Services required: Supply & Install

Property type: House

Job start date: Less than two months

The client is looking for: To get quotes and a contractor to do the work (local contractor availability)

Wed 7 September 2011 at 11:23

Need advice on wood burner and using existing chimney for flue

Property type: House

Services required: Supply & Install

Job start date: Less than a month

The client is looking for: To have just an idea of the price

Fri 2 October 2009 at 08:54

we are looking to get a stratford boiler stove and need an idea of cost the type of stove is tf70b stove with integral back boiler we have an old gas back boiler and gas fire that needs to come out

Services required: Install only

Property type: House

Job start date: Date not set

The client is looking for: To have just an idea of the price

Sun 11 November 2007 at 20:32

Removal of existing gas fire - mounted on front of chimney breast Potential creation of an appropriate fire place or hearth (or will seek local builder) Installation of wood burning/mutliful stove with boiler Connection to 3 or so radiators and/ or hot water system along side existing gas boiler

Services required: Install only

Property type: House

Job start date: Date not set

The client is looking for: To get quotes and a contractor to do the work

Mon 22 September 2008 at 16:47

to supply a mulifuel burner plus in stall

Services required: Supply & Install

Property type: House

Job start date: ASAP

The client is looking for: To get quotes and a contractor to do the work

Wed 21 October 2009 at 18:11

to install a log burning stove on an internal wall, to flue up across and out. aprox 10m.

Services required: Install only

Property type: House

Job start date: ASAP

The client is looking for: To get quotes and a contractor to do the work

Mon 7 September 2009 at 18:47

Install 10kw wood burner in new extension. rear flue, then straight up and out through vaulted ceiling, install minimum 4 metres flue, and flashing to new roof (single storey extension).

Services required: Install only

Property type: House

Job start date: Less than a month

The client is looking for: To have just an idea of the price (competive quote, under £1500)

Tue 11 November 2008 at 19:26

suitability for woodburner

Services required: Supply & Install

Property type: House

Job start date: Less than a month

The client is looking for: To get quotes and a contractor to do the work

Tue 23 June 2009 at 20:21

to install a log burner

Services required: Install only

Property type: Other (bungalow)

Job start date: Less than six months

The client is looking for: To get quotes and a contractor to do the work

Sun 24 October 2010 at 10:45

Replace existing old Stovax (5 flue) in sitting room converted from old dairy with curved ceiling. Black stove pipe goes through curved ceiling into void under bedroom floor, links to metalbestos twin wall, carries up -boxed in -through bedroom to enter roof void, bends to enter existing chimney stack. Has worked efficiently for at least 20 yrs. Need to see if still ok for new stove. Poss replace with 6 flue when settled on which new stove. Doing research on this..5k-6k output.

Services required: Install only

Property type: House

Job start date: ASAP

The client is looking for: To get quotes and a contractor to do the work

Mon 11 January 2010 at 11:01

To assess the size of the wood-burner required to heat the area, (I think probably a 4-6 KW multi-fuel burner). Check that our chimney is ok for a burner to be installed and supply and fit.

Services required: Supply & Install

Property type: House

Job start date: ASAP

The client is looking for: To get quotes and a contractor to do the work

Mon 19 October 2009 at 14:54

(We have purchased a log burning stove and need it fitting professionally. Although there was a stove there before we think that this will require the full flue kit but the job will need to be seen first.)

Services required: Install only

Property type: House

Job start date: ASAP

The client is looking for: To get quotes and a contractor to do the work

Thu 3 September 2009 at 12:53

I need someone to remove and dispose of my old wood bunrer and fit my new wood burner.

Services required: Install only

Property type: House

Job start date: Less than six months

The client is looking for: To get quotes and a contractor to do the work

Fri 30 October 2009 at 09:59

We have a small wood burner and need it re fitting to a chimney - to include fitting a new flu pipe.

Services required: Install only

Property type: House

Job start date: ASAP

The client is looking for: To get quotes and a contractor to do the work

Sun 19 July 2009 at 22:16

To fit a franco belge or hunter multifuel, create space behind current fireplace, render and lay hearth.

Services required: Install only

Property type: House

Job start date: ASAP

The client is looking for: To get quotes and a contractor to do the work

Mon 5 October 2009 at 15:17

installation of woodburning stove and flue lining.

Services required: Supply & Install

Property type: House (thatched cottage)

Job start date: Less than a month

The client is looking for: To get quotes and a contractor to do the work

Wed 19 November 2008 at 21:42

to supply and install a cottage style wood burner into a lounge in a new build property. Heat output is minimal as there are radiators in the lounge its is to be installed in aswell.Flue size is 150mm dia. Chinmney installed using dunbrick liners and lintel. Quarry tiles on hearth serving wood burner.

Services required: Supply & Install

Property type: House

Job start date: ASAP

The client is looking for: To get quotes and a contractor to do the work

Mon 27 September 2010 at 07:54

I wish to remove the old fire place and surround and install a wood burning stove

Services required: Supply & Install

Property type: House

Job start date: ASAP

The client is looking for: To get quotes and a contractor to do the work

Thu 2 October 2008 at 23:00

arga type fuel burning stove needs chimney instalation and plumbing to radiators

Services required: Install only

Property type: Other (bungalow)

Job start date: ASAP

The client is looking for: To get quotes and a contractor to do the work

Tue 19 February 2008 at 14:13

install and supply a wood burning stove and system to heat radiators and water

Services required: Supply & Install

Property type: Other (mobile home)

Job start date: Within a year

The client is looking for: To get quotes and a contractor to do the work

Sun 18 July 2010 at 10:40

Replace ParkRay solid fuel stove 88G, which is running the central heating & DHW, with 99G or SIMILA R A new chimney lining is required to meet present regulations. Work requires breakout of existing unit and reinstate facia and harth. My property is in fact a bungalow with an open vent pumped system.

Services required: Install only

Property type: House

Job start date: ASAP

The client is looking for: To get quotes and a contractor to do the work

Fri 13 June 2008 at 08:33

To install a wood burning stove where a Rayburn previously stood. Inspection plate still in place in chimney breast.

Services required: Install only

Property type: House

Job start date: Less than two months

The client is looking for: To get quotes and a contractor to do the work

Tue 14 September 2010 at 10:39

I am looking to have a wood burning stove fiitted in my bungalow lounge. The lounge is 17` x 11` x 8` and I would prefer it to be fiitted on the internal wall with a flue going up throug the loft. I would like a quote for a stove and the work please?

Services required: Supply & Install

Property type: Other (Bungalow)

Job start date: ASAP

The client is looking for: To get quotes and a contractor to do the work

Tue 2 September 2008 at 21:39

Supply and install a Stovax Stockton 8 (or equivalent) to a detached property (built circa 1750). Will require chimney liner, register plate and chimney pot cap.

Services required: Supply & Install

Property type: House

Job start date: Less than two months

The client is looking for: To get quotes and a contractor to do the work

Fri 24 September 2010 at 13:38

Initial survey of area, Hearth installation, stove purchase and installation

Services required: Supply & Install

Property type: House

Job start date: ASAP

The client is looking for: To get quotes and a contractor to do the work

Thu 12 November 2009 at 11:10

to install slide in 5 kw wood burner into existing fire place. we have an open fire at the moment

Services required: Install only

Property type: House

Job start date: Less than a month

The client is looking for: To have just an idea of the price

Mon 12 May 2008 at 18:44

remove old gas fire with back boiler fit new stove & flue,fire place had a coal fire in before we converted to gas

Services required: Supply & Install

Property type: House

Job start date: ASAP

The client is looking for: To get quotes and a contractor to do the work

Wed 3 December 2008 at 11:31

We live in a old farm house which was built in 1850 and we are looking to get a Multi-Fuel Woodburner fitted in our living room. We have a chimney in there that we frequently use for open fire. We would like to like to know how much it was cost to buy a 7kw woodburner and for it to be installed with the flues etc. We are not sure how much work is involved in this. We appreciate any help you can give us.

Services required: Supply & Install

Property type: House

Job start date: ASAP

The client is looking for: To have just an idea of the price

Tue 22 July 2008 at 19:35

Supply wood-burning stove (typically approx.£1100 - 1500) and install with suitable base and full HETAS approved external chimney system - black inside, exiting through cavity wall to stainless outside (height to give correct draught, etc alongside low pitched roof - approx.30 deg./ 1500mm. from eaves to ridge).

Services required: Supply & Install

Property type: House

Job start date: Less than six months

The client is looking for: To get quotes and a contractor to do the work

Wed 26 November 2008 at 08:31

to fit woodburner line the chimney on ground level house two storey house est 1865 slate roof

Services required: Supply & Install

Property type: House

Job start date: ASAP

The client is looking for: To get quotes and a contractor to do the work

Wed 29 September 2010 at 12:46

Supply & fit woodburner, exturnal flue

Services required: Supply & Install

Property type: House

Job start date: Less than two months

The client is looking for: To have just an idea of the price

Sat 24 October 2009 at 12:45

I would like a quote for the installation of a woodburning stove, there is currently a chimney in place and I just need to get an idea if - A - I need it lined, B how much if I do need it lined. C - If i don t need it line how much just to fit the stove. The house is 1997 Potton Timer Framed building Thanks

Services required: Install only

Property type: House

Job start date: Less than two months

The client is looking for: To get quotes and a contractor to do the work

Tue 13 September 2011 at 14:46

montfort classic

Property type: House

Services required: Supply & Install

Job start date: Less than two months

The client is looking for: To get quotes and a contractor to do the work

Mon 13 June 2011 at 19:41

we are planning on installing 2 wood burners, and including sealing the chimney

Property type: House

Services required: Supply & Install

Job start date: Less than two months

The client is looking for: To get quotes and a contractor to do the work

Sat 26 January 2013 at 22:01

A multi fuel stove with a back boiler to power 2 radiators

Property type: House

Services required: Supply & Install

Job start date: Less than a month

The client is looking for: To get quotes and a contractor to do the work

Tue 9 September 2014 at 09:41

Need a flue fitted to existing stove

Property type: House

Services required: Supply & Install

Job start date: ASAP

Fri 1 November 2013 at 19:35

looking at taking out the old chimney wall and putting in a wood burner

Property type: House

Services required: Install only

Job start date: Less than a month

Thu 13 December 2012 at 16:27

Fit into existing fireplace

Property type: House

Services required: Supply & Install

Job start date: ASAP

The client is looking for: To get quotes and a contractor to do the work

Thu 8 August 2013 at 10:57

Not sure which wood burner would be suitable for the space we have.

Property type: House

Services required: Supply & Install

Job start date: ASAP

The client is looking for: To get quotes and a contractor to do the work

Fri 24 May 2013 at 21:16

Conservatory wood burning stove

Property type: House

Services required: Supply & Install

Job start date: Date not set

The client is looking for: To get quotes and a contractor to do the work

scroll